1、Adopting dot mode difference eight channels alloy probe

2、It can detect flaw with more than 0.05mm length ,2mm deep

3、Detecting surface is external diameter and end face

4、Detecting speed is lower than 2seconds per piece

5、Detecting frequency scope:100HZ-10MHZ,changeable

6、Sample rate16×2500times/s

7、Gain ：0－70db

8、Phase position ：0－360° （set arbitrary）frequency step is 1°

9、Adopting industry control computer,WINDOWS operating platform flaw detection software

10、Automatic supply、automatic sorting and automatic count

11、There is no damage on accessories after eddy current flaw detection

12、Power consumption<400W（220V）

1、Sorting speed :not lower than  50pieces per minute

2、Using time :last for24hours

3、The switch speed of product:lower than 40minutes

4、The user provide air pressure ：7～9bars

5、Automatic emergency stop alarm function when it has system failure

6、Full automatic channel analysis

Working temperature：-15~55℃

Saving temperature：-20~60℃

Relative humidity: bot exceed 85%

Working voltage:：AC220±10V