1. Probe is not contact with the workpiece, so the durability of probe is increased.

2. Continuous detection improved the efficiency.

3. No need of probe replacement when detecting different metal parts, easy to operate.

4. With automatic balance, online detection reliability of instrument is improved.

5. The waveform display and synchronous tracking make defect signal more stable.

6. No need of magnetizing and demagnetization coil, equipment operation is simple and reliable.

1.Suitable objects: Small thin workpiece (Bearing race, etc.)

2. Using multi-frequency double channel to test the workpiece (one driving two)

3.Detection frequency range: 64Hz－5MHzadjustable

4.Specification and dimension: customized according to user’s need

5. Can detect hardness of ±1HRC 

6. Automatic feeding, automatic separating, automatic counting, automatic blanking

7. Detection speed: 1s/p (double channel)

8.Sampling speed: 4×25000times/s

9. Gain: 0－80db adjustable

10.Phase: 0－360°arbitrary adjustable, frequency pitch is 1°

11. Function of total number of qualified workpiece, acceptance number, and qualification rate statistics 

12. Adopt industrial control computer, WINDOWS operating platform flaw detection software

13. No damage to part after separating.

14.Power consumption <600W（220V）

15.Overall dimension: control cabinet 600×650×1600MM(customizable)，

Main engine：900×650×1000MM（customizable）

Operating temperature: -15~55℃

Storage temperature: -20~60℃

Relative humidity:less than 85%

Working voltage: AC220±10V