1、Do nondestructive detecting on workpiece, have no special requirements on the surface and shape of workpiece 

2、Satisfying requirements of doing hardness detection on workpiece on a large scale so as to make sure the quality of products 

3、Qualified and unqualified hardware,unqualified software can be separated automatically.

4、Sorting speed can be adjusted continuously

5、The instrument is easy 、direct convenient to operate ,it can be used not only online but also offline。

6、The frequency of sorting machine has a wide range of selection,it has 99kinds detecting frequency that are continuously adjustable.

7、Sorting instrument adopts double displaying ways of liquid crystal display and digital tube,the displaying interface has histogram and the cursor figure ,when workpiece passed detecting probe ,according to the position of histogram and cursor ,we can directly observe the degree of hardness of detected workpiece 

8、Setting upper limit and lower limit of qualified range of hardness  is very easy and fast to use

9、Equipped with lighting alarming on qualified products and unqualified products

10、When workpiece is still ,the instrument can display hardness value and magnetic flux of detected workpiece

11、The instrument can count on the amount of detected workpiece 、qualified workpiece、hardware、software  respectively

12、The instrument displays the time and data of detection

13、Sorting machine adopts baric drive ,it’s realiable

14、Detecting instrument can use both alternating current and direct current，it also can be used about 8hours when its power source being stopped

15、The equipment has compact structure、beautiful appearance and reliable running

1、Suitable condition: same specification dimension、heat treatment technology and material

2、Sorting accuracy:Brinell 10HB、Rockwell 1HRC

3、Resolution ratio :Brinell 1HB、Rockwell 0.1HRC

4、Testing speed : lower than 1500pieces per hour (specific speed is decided by the specification of workpiece and the proficiency of operating)

5、Working power source :AC 220V±10V、 50Hz 

6、Compressed air pressure ： 5 — 8kgf/cm 2 

7、Using environment :temperature :-10 ℃ ~+40 ℃、relative humidity <7.5% 

8、Dimension and weight: length*width*height=2100×750×1500mm，300KG9、The kinds of outer probe: Sleeve probe、Rectangular probe

Working temperature：-15~55℃

Saving temperature ：-20~60℃

Relative humidity: not exceed eighty-five percent

Working voltage：AC220±10V