SWT-632 type comprehensive eddy current testing machine is a full-automatic eddy current testing equipment on looking for flaw and sorting about hardness on workpiece for cylindrical metal parts .it is specially apply to one hundred percent testing about cylindrical metal parts.
scene pictures
1、It adopts double frequency and double channel to test workpiece
2、Searching flaw and hardness sorting will be finished in one process
3、It can test flaw in the depth 0.05mm
4、The speed of testing is lower than one piece in two seconds
5、Equipment noise<60db。Power consumption <500W /220V
6、Supplying sorting and counting automatically
7、The parts are not damaged after eddy current flaw detection
8、It does not need to be washed、demagnetized after testing
9、Count up the number of all workpiece and qualified products and percent of pass
1、Frequency range:64Hz-2MHz
2、Gain :0-48db,stepping is 0.5db
3、Phase position:0-360°、stepping is 1°
4、Independent optional frequency
5、Model setting with different style
6、Automatic phase position ,amplitude analysis
7、Automatic zero calibration system,it can set time interval of zero calibration
8、Different styles alarm area setting , it can be applied to every modes
9、Ratio of gains(Y/X):0.1-10
10、Clear screen automatically /tracking impedance
11、It can test signal playback ,saving
12、Fast simulation /digital electric automatic balance and dynamic tracking smoothing
13、Operating interface is simple and intelligent ,very easy to operate
14、It is suitable for every probe
15、It suitable for metal tube ,rods production and offline quality testing
16、Quick number
17、 Unequal amplitude 、Dissymmetrical phase position alarm area setting
18、 Many kinds of showing ways: impedance time base
19、 Digital smoothing
20、Voice light alarm output
21、 Automatic balance time
22、 Inside and outside clock selection
23、 It can save all kinds of testing procedures and testing database
24、The eddy current signal can playback or extend
25、 Recording showing flaw automatically
26、Showing ways: full line , blanking
27、Blanking Showing coefficient:1~100
28、Background option from rectangular coordinate system and polar coordinate system
29、Calendar and time showing
30、 Liquid crystal display
31、Simulating electric balance
32、Testing amplitude 、phase position ,digital value of flaw
working temperature :-15~55℃
saving temperature:-20~60℃
relative humidity : not exceed 85%
working voltage :AC220±10V